Home > Distributed products > Carl
CARL  HD 530N

CARL HD 530N

HEAVY DUTY PUNCH

DESCRIPTIVE NOTES

The materials and the mechanism employed in the manufacturing of this CARL heavy duty punch assure a high quality and resistant product, strong and elegant at the same time, thanks to the modern design. CARL heavy duty punch HD-530N is equipped with the new "self-centring" guide, which allows the automatic centring (2 holes) of the sheets from A4 up to B6 sizes and is ideal to make 4 holes on the long side of the A4 size sheets and on the short side of the A3 size sheets.

      

CARL heavy duty punch HD-530N is provided with a new extraction system of the male-dies, for their easy replacement.



In addition it is possible to obtain with little effort, also thanks to the ergonomic handle grip, an always precise punching without slavering, also for considerable paper thickness.

CARL SRS-400

CARL SRS-400

ring reinforcer (seal ring stamp)

DESCRIPTIVE NOTES

No doubt useful and practical both at school and in the office, the new CARL Ring Reinforcer sticks easily the seal rings to reinforce or repair the holes made by punches.

In addition: Thanks to the tip on the base, you can stick the rings very easily and precisely.

CARL Alisys LP-20

CARL Alisys LP-20

double lever punch

DESCRIPTIVE NOTES

CARL ALISYS is a powerful and at the same time smart punch, with a design modern and accurate in every detail, available in three shiny colours. It has a full flat gauge with a press-release paper holder for an easy and exact sheet positioning, from UNI A4 size (two or four holes) to B6 size.

How to remove stopper:
1.Push down the handle
2.Remove the stopper carefully let the handle back

How to use handle lock:
1.Push down the handle
2.Push in the lock button

How to use as a 4-hole punch:
1.Align gauge at 4-hole position
2.Set paper and punch once, overturn paper and punch once more

CARL ALISYS LP-20 punch, manufactured by CARL MANUFACTURING CO., LTD. - TOKYO, is distributed in Italy exclusively by BALMA, CAPODURI & C. s.p.a., which assures a good after-sale service too.

In addition:The perforator is internally equipped with a second lever to create a synergistic effect with the handle by enhancing the power of punching and extremely reducing the effort needed to punch considerable thickness of paper, up to 18 sheets

CARL CB-8300

CARL CB-8300

cash box

DESCRIPTIVE NOTES

CARL CB-8300 cash box, manufactured by CARL MANUFACTURING CO. LTD. - TOKYO, is distributed exclusively in Italy by BALMA, CAPODURI & C. s.p.a. who also offers an efficacious after-sale servicing.

Its contained dimensions but enough for various kind of uses, the care paid in its realization and the very good relation between quality and price (common to all "CARL" products) let this article be an interesting news in a field, such as cash-boxes one, where robustness and handiness are fundamental.
Provided with handle for the transportation, extractable coin tray and double safety system made up of a lock (with n. 2 standard keys) and a dial.

CARL CC-2000

CARL CC-2000

pencil sharpener

DESCRIPTIVE NOTES

CARL CC-2000 can sharp all types of standard pencils: round, hexagonal, triangular, lead and coloured. Equipped with a practical system for the regulation of the point sharpness (5 options), it allows to obtain the best performance from each type of pencil. The harder the lead is (eg. 3H), the sharper the point should be. For soft leads (eg. 3B) or coloured pencils an intermediate position is suggested

The pencil point reaches the desired sharpness when the pencil holder stops moving and the handle turns idle.



In addition: standard equipped with a fixing clamp, "Carl" pencil sharpener can be easily and firmly fixed to any plain board.



CARL CB-2012

CARL CB-2012

cash box

DESCRIPTIVE NOTES

CARL cash boxes, manufactured by CARL MANUFACTURING CO., LTD. - TOKYO, are distributed in Italy exclusively by BALMA, CAPODURI & C. s.p.a., which assures a good after-sale service too.

These articles are an interesting offer in the field of cash boxes, thanks to their small dimensions which allow nonetheless many kinds of uses, to the care paid in their manufacturing and the very good relation between quality and price. Equally important, they are strong and handy. Both provided with a handle for transportation, extractable coin tray and safety lock (two standard keys).

CARL TG-110/TG-120

CARL TG-110/TG-120

trim gears

DESCRIPTIVE NOTES

CARL new trim gears work with a safe and innovative self-sharpening cutting device with a rotary blade. This allows you to obtain high quality results in the cutting capacity and cutting precision, which is very important not only for professional end-users. Thanks to their new design, their high performances and a fair price, they can be ideally employed in every office, where they are even more appreciated because they are light, practical and easy to use. One of the novelties is the spring mechanism, by which the slider automatically returns to its original position when your hand is off. The cutting table shows the DIN measures of the different paper sizes, for an easier and more precise positioning of the sheets to be cut.

It is possible to work on a bigger cutting table using the retractable sub-table. The paper holder, with graduations marked at intervals of 1 mm, starting at a position of 3 mm from the edge, allows to trim borders with extreme precision. Finally, the guide can be adjusted in order to obtain a perfect right angle on every occasion



CARL P-552N

CARL P-552N

pen stand

DESCRIPTIVE NOTES

CARL P-552N pen stand, manufactured by CARL MANUFACTURING CO., LTD. - TOKYO, is distributed in Italy exclusively by BALMA, CAPODURI & C. s.p.a., which assures a good after-sale service too.

CARL P-552N is a smart object well looking on every desk-top.

CARL C-55 FUN blister

CARL C-55 FUN blister

paper holders

DESCRIPTIVE NOTES

CARL C-55 paper holder, manufactured by CARL MANUFACTURING CO., LTD. - TOKYO, is distributed in Italy exclusively by BALMA, CAPODURI & C. s.p.a., which assures a good after-sale service too.

Light and compact, it may be placed everywhere, according to each user's reading need; it is equipped with a practical spring system and it is perfect as paper holder since it may hold up to 20 sheets A4 size; it may also be used for sheets B4 size (mm 250 x 353). It is available in blister packaging and in five modern colours combinations (transparent body and sheets holder transparent blue, transparent violet, transparent green, transparent pink, transparent orange).

CARL DC-210N/DC-220/DC-230N/DC-250

CARL DC-210N/DC-220/DC-230N/DC-250

rolling slicer trimming boards

DESCRIPTIVE NOTES

Unique, the new CARL rolling slicer trimming boards use a cutting system based on a rolling cutter moving on an appropriate mat, with excellent results both for thickness and for cutting precision (it is possible to cut also films, fabrics, etc.). For these characteristics the models DC-210N, DC-220, DC-230N and DC-250 are mainly appreciated by technical users, while the models DC-101, DC- 102, and DC-200N, also thanks to an excellent relation between their performances and their sales prices, are perfectly suitable for every office, where they are appreciated for their lightness and handiness, together with non-common performances and easiness to use.

In addition: It is possible to choose between straight and dashed cut simply by changing the cutter; mat and cutters are fairly long usable and may be simply replaced in a few seconds with the spares, supplied in the standard equipment for the models CARL DC-210N, DC-220, DC-230N and DC-250, available upon request for the models DC-101, DC-102 and DC-200N. A scoring blade is available for all models of CARL paper trimmers.

Safety: CARL trimming boards completely match with the quality standards fixed for machines which must be used, always in maximum safety, in every working place, at home, at school and in the office. In the models DC-101 and DC-102 an automatic safety device ensures the cutter is released in the cutting position only, thus avoiding any accidental contact with the blade

CARL DC-101/DC-102

CARL DC-101/DC-102

rolling slicer trimming boards

DESCRIPTIVE NOTES

Unique, the new CARL rolling slicer trimming boards use a cutting system based on a rolling cutter moving on an appropriate mat, with excellent results both for thickness and for cutting precision (it is possible to cut also films, fabrics, etc.). For these characteristics the models DC-210, DC-220, DC-230 and DC-250 are mainly appreciated by technical users, while the models DC-101, DC- 102, and DC-200N, also thanks to an excellent relation between their performances and their sales prices, are perfectly suitable for every office, where they are appreciated for their lightness and handiness, together with non-common performances and easiness to use.

In addition: It is possible to choose between straight and dashed cut simply by changing the cutter; mat and cutters are fairly long usable and may be simply replaced in a few seconds with the spares, supplied in the standard equipment for the models CARL DC-210, DC-220, DC-230 and DC-250, available upon request for the models DC-101, DC-102 and DC-200N. A scoring blade is available for all models of CARL paper trimmers.

Safety: CARL trimming boards completely match with the quality standards fixed for machines which must be used, always in maximum safety, in every working place, at home, at school and in the office. In the models DC-101 and DC-102 an automatic safety device ensures the cutter is released in the cutting position only, thus avoiding any accidental contact with the blade

CARL DC-200N

CARL DC-200N

rolling slicer trimming boards

DESCRIPTIVE NOTES

Unique, the new CARL rolling slicer trimming boards use a cutting system based on a rolling cutter moving on an appropriate mat, with excellent results both for thickness and for cutting precision (it is possible to cut also films, fabrics, etc.). For these characteristics the models DC-210, DC-220, DC-230 and DC-250 are mainly appreciated by technical users, while the models DC-101, DC- 102, and DC-200N, also thanks to an excellent relation between their performances and their sales prices, are perfectly suitable for every office, where they are appreciated for their lightness and handiness, together with non-common performances and easiness to use.

In addition: It is possible to choose between straight and dashed cut simply by changing the cutter; mat and cutters are fairly long usable and may be simply replaced in a few seconds with the spares, supplied in the standard equipment for the models CARL DC-210, DC-220, DC-230 and DC-250, available upon request for the models DC-101, DC-102 and DC-200N. A scoring blade is available for all models of CARL paper trimmers.

Safety: CARL trimming boards completely match with the quality standards fixed for machines which must be used, always in maximum safety, in every working place, at home, at school and in the office. In the models DC-101 and DC-102 an automatic safety device ensures the cutter is released in the cutting position only, thus avoiding any accidental contact with the blade

CARL DC-90N

CARL DC-90N

rolling slicer trimming board

DESCRIPTIVE NOTES

CARL DC-90N rolling slicer trimming board, manufactured by CARL MANUFACTURING CO., LTD. - TOKYO, is distributed in Italy exclusively by BALMA, CAPODURI & C. s.p.a., which assures a good aftersale service too..

CARL DC 90, ideal for home, school and office, employs a cutting system based on a rolling slicer moving on an appropriate mat (it is possible to cut also films, fabrics, etc.).The new illuminated ruler helps to better check the sheet position before cutting. The cardboard packaging can be hung vertically.

In addition: it is possible to make either a straight or a dashed cut, as both cutters are supplied with the paper cutter; spare cutters are available.

Safety:CARL DC-90N paper cutter completely matches with the quality standards fixed for machines which must be used, always in maximum safety, in every working place, home, school and office. The practical safety cover avoids any accidental contact with the cutter.

CARL DC-100N

CARL DC-100N

rolling slicer trimming board

DESCRIPTIVE NOTES

CARL DC-100N rolling slicer trimming board, manufactured by CARL MANUFACTURING CO., LTD. - TOKYO, is distributed in Italy exclusively by BALMA, CAPODURI & C. s.p.a., which assures a good aftersale service too.

CARL DC-100N, ideal for home, school and office, employs a cutting system based on a rolling slicer moving on an appropriate mat (it is possible to cut also films, fabrics, etc.). The sheets blocking device is magnetic, the paper holder plate is illuminated, for a better vision of the sheet position before cutting, and the millimetre ruler is extractable. The cardboard packaging can be hung vertically.

In addition: it is possible to make either a straight or a perforation cut, as both cutters are supplied with the paper cutter; spare cutters are also available.

Safety: The CARL paper cutters completely match with the quality standards fixed for machines which must be used, always in maximum safety, in every working place, home, school and office. The practical safety cover avoids any accidental contact with the cutter


CARL 122N/124/HD 410N

CARL 122N/124/HD 410N

heavy duty punches

DESCRIPTIVE NOTES

The materials and the mechanism employed in the manufacturing of CARL heavy duty punches assure high quality and resistance products, strong and elegant at the same time, thanks to the modern design. CARL 122N and HD-410N equipped with the new "self-centring" guide allow the automatic centring (2 holes) of the sheets from A4 up to B6 size; CARL 124 is ideal for a 4 holes punching along the long side of the A4 size sheets.
 

CARL model ref. HD-410N is provided with a new extraction system of the male-dies, for their easy replacement.


 

In addition: it is possible to obtain with little effort, also thanks to the ergonomic handle grips, an always precise punching without slavering, also for reasonable sheet thickness.
 

CARL 120

CARL 120

heavy duty punches

DESCRIPTIVE NOTES

The materials and the mechanism employed in the manufacturing of CARL heavy duty punches assure high quality and resistance products, strong and elegant at the same time

In addition: it is possible to obtain, with little effort, an always precise perforation without slavering, also for reasonable sheet thickness.

Sheets forking guide is marked for the different punching positions, two or four holes, according to the different sheets sizes.

Theme picker

CONTACT US

VIEW OUR
SALES NETWORK


Find out our sales agents in Italy and abroad.

WANT TO DOWNLOAD
OUR CATALOGUES?

Download here the catalogue of our distributed products.

OUR VALUES

Passion for manufacturing, innovation, efficiency, "made in Italy", social responsibility and respect for the environment... These values have always been our landmarks.

OUR OTHER WEBSITES

 
SINCE 1924 IN LOVE WITH QUALITY.
Discover the secret of our "ZENITH" staplers and know why they have been the most copied all over the world for 90 years!
Discover the glue which elicits creativity!

OUR BRANDS

DISTRIBUTED PRODUCTS